![]() Enter or select the appropriate information in the following fields.The interface description allows you to identify the physical connector on the switch. Listed as a letter and a numeral, such as "B4". The interface description of the interface to which a device is connected. Verify that credentials are correct and that you can view other SNMP information from the switch, and then run the MAC Address tool again. Note: If Port and Index report values of -1, WhatsUp Gold did not understand the response from the switch or the request timed out. This number typically corresponds with the interface port number. The unique value assigned to each interface. The port numbers of the switch ports that are connected to the devices that own the listed MAC addresses. If Get connectivity information using SNMP is selected when the tool is run, the results include the following columns: The hostnames of devices on your network. The MAC addresses of devices on your network. The IP addresses of devices on your network. If Get connectivity information using SNMP is not selected when the tool is run, the results include the following columns: Tool resultsĪfter running the tool, the results of the test are displayed at the bottom of the page. ![]() This tool is useful to solve IP address conflicts within your network by providing you with specific switch information. The MAC Address tool enables you to discover what MAC addresses are present on your network and gives you the opportunity to obtain physical connectivity information for devices on your network.
0 Comments
Leave a Reply. |